Nánari lýsing
The machine is equipped with a 23 HP gasoline engine, tracks frames with oscillating system and a specific tracks profile that allows a perfect ground surface contact to climb over hill and
mountain areas, embankments, cliffs, and in all those environments where the adherence is very
low and a machine for high slopes is required.
The implements are mounted on a front hydraulic lifter which allows a quick-change system,
making the work easier and multi-functional. For the implements there are always one high flow
closed circuit hydraulic line and one double effect open circuit hydraulic line; all the lines are
equipped with quick couplings.
Standard set up
ENGINE:
• BRIGGS&STRATTON Vanguard V-Twin, 4-stroke, naturally aspirated, gasoline, air-cooled engine
• Displacement 0.6 l
• Power 17.2 kW @ 3600 rpm
• Direct injection
• Emissions class EU Stage V
• Special system that guarantees the correct engine lubrication up to 50° of inclination
• Reversible self-cleaning fan
• Dedicated radiator for engine oil cooling
• Electric ignition controlled by the remote control and push-on ignition in case of emergency
HYDRAULIC SYSTEM:
• Hydraulic system with Q8 HELLER46 mineral oil
• Dedicated radiator for hydraulic oil cooling
• High pressure anti-abrasion flexible hoses
• Flat-face quick couplings
• Pressurized hydraulic circuit and immersion filter inside the tank
• Traction of each track by orbital motor operated by a dedicated closed circuit piston pump
• Automatic mechanical negative brake when the engine is OFF
• Gear pump in open circuit and multi-section electro-hydraulic distributor for services and to
operate the implement (P+T+D)
• Floating system of the lifter controlled by an electrohydraulic distributor
FRAME:
• Steel monocoque supporting structure
• N. 4 hooks for lifting the machine on the frame
• Transmission drive wheels with hardening heat treatment
• Rear idle wheels with hardening heat treatment
• Tracked undercarriage with 4 sliding rollers and upper and lower track guiding bars
• Screw operated track tensioner equipped with safety spring
• Machine body hoods in painted steel
• Rear radiator protection grid in painted steel and quick opening
• Mechanical quick coupling for the tool on the front lifter
• 15 l painted steel petrol tank
• 15 l painted steel hydraulic oil tank
SYSTEM & COMMANDS:
• AUTEC radio control with a range of 150 m working with FHSS technology
• N. 2 remote control batteries
• Remote control battery charger with lighter socket (10-30 V DC)
• Emergency button on remote control with immediate stop of the machine active functions
• Advancement controlled through single axis proportional joystick
• Steering controlled through single axis proportional joystick
• Potentiometer for controlling the maximum advancement speed (variable from 0 to 100%)
• Potentiometer for the correction of the trajectory and reduction of the drift in advancement
• High flow hydraulic outpout controlled through on/off lever
• Lifter height controlled through on/off lever
• Two-way selector for selecting the lifter operating mode (standard/floating)
• Double-effect hydraulic output controlled through on/off lever
• Semi-ridgid carrying case for remote control and accessories supplied with the machine
