Stækka mynd
Handvirk línumerkivél Hofmann
Til baka í vörur
Mulag RMK 1200

Mulag MK 1000

Technical data MS-Cutters GB-RM Features
Mowing width 1000 mm 1000 mm
  • Directly driven by a hydraulic motor with axial pistons(can be mounted on the right- or left-hand side)
  • Adjustment of the cutting thickness through vertically adjustable roller
  • MULAG-quick change device incl. hydraulic hoses with quick couplings
  • Protection against projection with chain
  • GS approved
Total width (outside width)
 1360 mm 1360 mm
Max. speed of flail shaft 2000 rpm 2900 rpm
Cutters 10 pieces 24 pieces
Weight approx. 255 kg approx. 245 kg
Max. permissible power consumption approx. 35 kW approx. 48 kW
Hydraulic oil pressure max. 340 bar max. 340 bar
Flow rate hydraulic oil 62 l/min 88 l/min
Working speed depending on growth up to 10 km/h up to 10 km/h

Sá nánar: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/mk-1100/

 

Vörunúmer: c75f3ff6fb4b Vöruflokkur: Flokkur:
Senda fyrirspurn

Senda fyrirspurn

Svipaðar vörur

Mulag MK MSL

Technical dataFeatures
Mowing width 1000 mm
  • Direct drive via hydraulic motor with axial pistons (can be mounted on the right- or left-hand side)
  • The cutting height can be adjusted through the roller
  • MULAG-quick change device incl. hydraulic hoses with quick couplings
  • Protection against projection through a double rubber apron
Total width (outside width) 1450 mm
Max. speed of flail shaft 2000 rpm
Cutters 12 Pieces (MS-L)
Weight approx. 165 kg
Max. permissible power consumption approx. 30 kW
Hydraulic oil pressure max. 340 bar
Flow rate hydraulic oil 56 l/min
Working speed depending on growth up to 10 km/h

 

Sjá nánar hér: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/mk-msl/

 

 

Lesa meira

Mulag TMK 1200

TMK 1200

The automatic sensor mowing head TMK 1200 is equipped with a road speed-related automatic obstacle detector for mowing grass and shrub up to 10 mm near road posts and crash barriers.

Attachment exchange

The TMK 1200 is very suitable for attachment exchange with other working attachments such as the mowing head MK 1200 plus. Thus, the effectiveness of your boom equipment is increased tremendously

Technical dataMS-RSafetyFeatures
Mowing width 1200 mm 1200 mm
  • Hydraulic drive
  • MULAG-quick change fixture incl. hydraulic hoses with quick couplings
  • Automatic evasive movement when detecting an obstacle
  • Automatic adaptation to the ground surface
  • Can be delivered either with flail-shaft or with safety-shaft
Max. speed of flail shaft 3000 rpm 4800 rpm
Weight approx. 205 kg approx. 205 kg
Maximum permissible power consumption max. 27 kW max. 27 kW
Hydraulic oil pressure max. 340 bar max. 340 bar
Flow rate hydraulic oil 62 l/min 62 l/min
Working speed depending on growth up to 6 km/h up to 10 km/h

Sjá nánar hér: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/tmk-1200/

 

 

 

Lesa meira

Mulag UMK 1200

Technical dataMS-CuttersGB-RMFeatures
Mowing width 1200 mm 1200 mm
  • Direct drive by axial piston motor (to be fitted right or left)
  • The cutting height can be selected by adjusting the roller
  • MULAG-quick change fixture incl. hydraulic hoses with quick couplings
  • Chain protection against flying objects
Total width (outside width) 1500 mm 1500 mm
Max. speed of flail shaft 2000 rpm 2900 rpm
Cutters 12 pieces 30 pieces
Weight approx. 350 kg approx. 340 kg
Max. permissible power consumption approx. 35 kW approx. 48 kW
Hydraulic oil pressure max. 340 bar max. 340 bar
Flow rate hydraulic oil 62 l/min 88 l/min
Working speed depending on growth up to 10 km/h up to 10 km/h

 

Sjá nánar hér: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/umk-1200/

 

 

Lesa meira

Mulag RMK 1200

Technical dataMS-RSafetyFeatures
Mowing width 1200 mm 1200 mm
  • Optimal operation under crash-barriers thanks to the low construction
  • Road speed-related automatic obstacle detector
  • Protection against projection with chain
Max. speed of flail shaft 3000 rpm 4800 rpm
Weight approx. 170 kg approx. 170 kg
Maximum permissible power consumption max. 25 kW max. 25 kW
Hydraulic oil pressure max. 280 bar max. 280 bar
Flow rate hydraulic oil 50 l/min 50 l/min
Working speed depending on growth up to 10 km/h up to 10 km/h

Sjá nánar: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/rmk-1200/

 

 

Lesa meira

Mulag DWB

 

Technical dataFeatures
Washing width 800 mm
  • Hydraulic drive
  • Water spraying device with adjustable nozzles
  • MULAG-quick change fixture incl. hydraulic hoses with quick couplings
  • Spray protection and water hose
Brush diameter 600 mm
Weight approx. 200 kg
Max. permissible power consumption max. 35 kW
Hydraulic oil pressure 340 bar
Flow rate hydraulic oil 62 l/min

Brush speed

 300 rpm

Sjá nánar hér: https://www.mulag.de/en/roadside-equipment/products/working-attachments/washing-systems/dwb/

 

 

Lesa meira

Mulag MK 1200 Plus

Technical dataMS-CuttersGB-RMFeatures
Mowing width 1100 mm 1200 mm
  • Directly driven by a hydraulic motor with axial pistons(can be mounted on the right- or left-hand side)
  • Adjustment of the cutting thickness through vertically adjustable roller
  • MULAG-quick change device incl. hydraulic hoses with quick couplings
  • Protection against projection with chain
  • GS approved
Total width (outside width)
 1580 mm 1580 mm
Max. speed of flail shaft 1900 rpm 2800 rpm
Cutters 12 pieces 30 pieces
Weight approx. 320 kg approx. 305 kg
Max. permissible power consumption approx. 35/48 kW approx. 48 kW
Hydraulic oil pressure max. 340 bar max. 340 bar
Flow rate hydraulic oil 62/88 l/min 88 l/min
Working speed depending on growth up to 10 km/h

up to 10 km/h

 

Sjá nánar hér: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/mk-1200-plus/

 

 

Lesa meira

Mulag MK 1200

Technical dataMS-CuttersGB-RMFeatures
Mowing width 1200 mm 1200 mm
  • Directly driven by a hydraulic motor with axial pistons(can be mounted on the right- or left-hand side)
  • Adjustment of the cutting thickness through vertically adjustable roller
  • MULAG-quick change device incl. hydraulic hoses with quick couplings
  • Protection against projection with chain
  • GS approved
Total width (outside width)
 1500 mm 1500 mm
Max. speed of flail shaft 2000 rpm 2900 rpm
Cutters 12 pieces 30 pieces
Weight approx. 320 kg approx. 305 kg
Max. permissible power consumption approx. 35 kW approx. 48 kW
Hydraulic oil pressure max. 340 bar max. 340 bar
Flow rate hydraulic oil 62 l/min 88 l/min
Working speed depending on growth up to 10 km/h up to 10 km/h

 

Sjá nánar hér: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/mk-1200/

Lesa meira

Mulag MK 1600

Technical dataMS-CuttersGB-RMFeatures
Mowing width 1600 mm 1600 mm
  • Directly driven by a hydraulic motor with axial pistons(can be mounted on the right- or left-hand side)
  • Adjustment of the cutting thickness through vertically adjustable roller
  • MULAG-quick change device incl. hydraulic hoses with quick couplings
  • Protection against projection with chain
  • GS approved
Total width (outside width) 1900 mm 1900 mm
Max. speed of flail shaft 2000 rpm 2900 rpm
Cutters 16 pieces 42 pieces
Weight
 approx. 385 kg approx. 385 kg
Max. permissible power consumption approx. 35 kW approx. 48 kW
Hydraulic oil pressure max. 340 bar max. 340 bar
Flow rate hydraulic oil 62 l/min 88 l/min
Working speed depending on growth up to 10 km/h up to 10 km/h

Sjá nánar hér: https://www.mulag.de/en/roadside-equipment/products/working-attachments/mowing/mk-1600/

 

 

Lesa meira