AEBI TT281 Terratrac+ tractor
Contact the dealers for prices and more information
AEBI TT281 TERRATRAC multipurpose tractor Here, a versatile tractor is designed to handle the most difficult conditions, such as steep side slopes and congestion. The engine is 109 hp Aebi-Schmidt website
Schmidt – MS
The MS airport teeth are manufactured by Aebi Schmidt in Germany, which is one of the largest manufacturers of equipment for airport maintenance in Europe. This tooth is specially designed for airport handling. The tooth has a 25 degree angle to the cutting blades and thus rips up well. You can get Tarron in the sizes, 4,8m and up to 8.0m. You can also choose helper bikes or skis, rubber cutters or steel cutters, etc. A lot of attention is paid to safety in production at Schmidt, but all teeth are produced in 4-6 units, where each unit is independently springing, and the cutter blades also have independent springing. You can get these tines with drool blades behind the main blades to clean up what's left.
Technical information:
| MS 48.1 | MS 56.1 | MS 64.1 | MS 72.1 | MS 80.1 | |
| Height in center (mm) | 1.060 | 1.060 | 1.060 | 1.060 | 1.140 |
| Height to end (mm) | 1.200 | 1.200 | 1.200 | 1.200 | 1.290 |
| Maximum width (mm) | 2.700 | 3.000 | 3.200 | 3.400 | 3.600 |
| Routing width at 32 degrees (mm) | 2.290 | 2.540 | 2.710 | 2.880 | 3.050 |
| Number of papers | 3 | 3 | 4 | 4 | 4 |
| Weight without fasteners (kg) | 870 | 900 | 1.015 | 1.060 | 1.110 |
Schmidt CJS
Schmidt is one of the largest manufacturers of sand and salt spreaders in the world today and it can honestly be said that this is the Rolls on the market today. The production is all quality certified as the Stratos diffusers have long proven how reliable they are, strong, simple to use and cheap to operate. It is possible to choose between spreading only material (salt or sand), spreading only brine or both at once. The spreader is equipped with a complete computer that controls all the activities of the spreader, such as spread volume and spread width regardless of vehicle speed. The computer also records everything the spreader does, such as driving speed, location, spread amount of material and liquid, spread width and whether more is spread to the right or left. This information can then be sent through the GPRS system to Vegagerðirn's Winterman system, or a user can run his own system and monitor all distributors at work, centrally from the company's computer. The diffusers are custom ordered according to the needs and wishes of the buyer, but the ordering process takes 8-10 weeks.
Technical information:
| 35 | 40 | 50 | 60 | 70 | 80 | 90 | |
| Amount of material (cubic meters) | 3,5 | 4,0 | 5,0 | 6,0 | 7,0 | 8,0 | 9,0 |
| Spreading width (m) | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 |
| Water tanks (L) | 1.760 | 1.760 | 1.760 | 2.200 | 3.000 | 3.000 | 3.000 |
| Extra water tanks (L) | 2.200 | 2.200 | 3.000 | 3.860 | 3.860 | 3.860 | |
| Empty weight (kg) | 972 | 952 | 1.015 | 1.109 | 1.293 | 1.325 | 1.357 |
Schmidt Stratos A
The Stratos A spreader is suitable for everything from 4WD pick-up cars to tractors and pick-up trucks. The spreader runs on its own suction system powered by a pump connected to the spreader's axle, so only electricity from the vehicle is required. However, if the vehicle has a gas outlet, the diffuser can also be connected to it. The diffuser comes with a control panel where you can adjust and control the diffusion in a variety of ways. The spreader also has a complete computer that controls all its functions and regulates the speed of the belt and disc depending on the speed of the vehicle. You can choose between 3 types of control box, CB, CX and CL. These diffusers are ordered according to the needs and wishes of the buyer, but the order process takes 8-10 weeks.
Technical information:
| 08 | 11 | 15 | 17 | 35 | |
| Material tank size (cubic meters) | 0,8 | 1,1 | 1,5 | 1,7 | 3,5 |
| Spreading width (m) | |||||
| Water tanks (L) | 1 | 1 | 2 | 1 | 1 |
| Maximum Weight (kg) | 1.800 | 1.800 | 2.500 | 3.500 | 8.000 |
| Empty weight (kg) | 362 | 381 | 334 | 435 | 1.041 |
Schmidt Stratos II
Schmidt is one of the largest manufacturers of sand and salt spreaders in the world today and it can honestly be said that this is the Rolls on the market today. The production is all quality certified as the Stratos diffusers have long proven how reliable they are, strong, simple to use and cheap to operate. It is possible to choose between spreading only material (salt or sand), spreading only brine or both at once. The spreader is equipped with a complete computer that controls all the activities of the spreader, such as spread volume and spread width regardless of vehicle speed. The computer also records everything the spreader does, such as driving speed, location, spread amount of material and liquid, spread width and whether more is spread to the right or left. This information can then be sent through the GPRS system to Vegagerðirn's Winterman system, or a user can run his own system and monitor all distributors at work, centrally from the company's computer. The diffusers are custom ordered according to the needs and wishes of the buyer, but the ordering process takes 8-10 weeks.
Technical information:
| 17 | 20 | 25 | 27 | 30 | |
| Amount of material (cubic meters) | 1,7 | 2,0 | 2,5 | 2,7 | 3,0 |
| Spreading width (m) | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 |
| Water tanks (L) | 880 | 880 | 1.210 | 1.210 | 1.210 |
| Extra water tanks (L) | |||||
| Empty weight (kg) | 605 | 616 | 665 | 671 | 682 |
Schmidt Stratos II
Schmidt is one of the largest manufacturers of sand and salt spreaders in the world today and it can honestly be said that this is the Rolls on the market today. The production is all quality certified as the Stratos diffusers have long proven how reliable they are, strong, simple to use and cheap to operate. It is possible to choose between spreading only material (salt or sand), spreading only brine or both at once. The spreader is equipped with a complete computer that controls all the activities of the spreader, such as spread volume and spread width regardless of vehicle speed. The computer also records everything the spreader does, such as driving speed, location, spread amount of material and liquid, spread width and whether more is spread to the right or left. This information can then be sent through the GPRS system to Vegagerðirn's Winterman system, or a user can run his own system and monitor all distributors at work, centrally from the company's computer. The diffusers are custom ordered according to the needs and wishes of the buyer, but the ordering process takes 8-10 weeks.
Technical information:
| 35 | 40 | 50 | 60 | 70 | 80 | 90 | |
| Amount of material (cubic meters) | 3,5 | 4,0 | 5,0 | 6,0 | 7,0 | 8,0 | 9,0 |
| Spreading width (m) | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 |
| Water tanks (L) | 1.760 | 1.760 | 1.760 | 2.200 | 3.000 | 3.000 | 3.000 |
| Extra water tanks (L) | 2.200 | 2.200 | 3.000 | 3.860 | 3.860 | 3.860 | |
| Empty weight (kg) | 972 | 952 | 1.015 | 1.109 | 1.293 | 1.325 | 1.357 |
Schmidt Stratos II
Schmidt is one of the largest manufacturers of sand and salt spreaders in the world today, and it can honestly be said that this is the Rolls of the market. The production is all quality certified as the Stratos diffusers have long proven how reliable they are, strong, simple to use and cheap to operate. It is possible to choose between spreading only material (salt or sand), spreading only brine or both at once. The spreader is equipped with a complete computer that controls all the activities of the spreader, such as spread volume and spread width regardless of vehicle speed. The computer also records everything the spreader does, such as driving speed, location, spread amount of material and liquid, spread width and whether more is spread to the right or left. This information can then be sent through the GPRS system to Vegagerðirn's Winterman system, or a user can run his own system and monitor all distributors at work, centrally from the company's computer. The diffusers are custom ordered according to the needs and wishes of the buyer, but the ordering process takes 8-10 weeks.
Technical information:
| 06 | 08 | 11 | 15 | 17 S | |
| Amount of material (cubic meters) | 0,6 | 0,8 | 1,1 | 1,5 | 1,7 |
| Spreading width (m) | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 |
| Water tanks (L) | 350 | 350 | 350/500 | 500 | 850 |
| Extra water tanks (L) | |||||
| Empty weight (kg) | 331 | 331 | 350 | 380 | 435 |
Schmidt Stratos III (New Generation)
Now there is a new generation of Stratos. Schmidt is one of the largest manufacturers of sand and salt spreaders in the world today and it can honestly be said that this is the Rolls on the market today. The production is all quality certified as the Stratos diffusers have long proven how reliable they are, strong, simple to use and cheap to operate. It is possible to choose between spreading only material (salt or sand), spreading only brine or both at once. The spreader is equipped with a complete computer that controls all the activities of the spreader, such as spread volume and spread width regardless of vehicle speed. The computer also records everything the spreader does, such as driving speed, location, spread amount of material and liquid, spread width and whether more is spread to the right or left. This information can then be sent through the GPRS system to Vegagerðirn's Winterman system, or a user can run his own system and monitor all distributors at work, centrally from the company's computer. The diffusers are custom ordered according to the needs and wishes of the buyer, but the ordering process takes 8-10 weeks.
Technical information:
| 40 | 50 | 60 | 70 | 80 | 90 | ||
| Amount of material (cubic meters) | 4,0 | 5,0 | 6,0 | 7,0 | 8,0 | 9,0 | |
| Spreading width (m) | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | 3 – 12 | |
| Water tanks (L) | 1.760 | 1.760 | 2.200 | 3.000 | 3.000 | 3.000 | |
| Extra water tanks (L) | 2.200 | 2.200 | 3.000 | 3.860 | 3.860 | 3.860 | |
| Empty weight (kg) | 952 | 1.015 | 1.109 | 1.293 | 1.325 | 1.357 |
Schmidt Stratos XL
Schmidt is one of the largest manufacturers of sand and salt spreaders in the world today and it can honestly be said that this is the Rolls on the market today. The production is all quality certified as the Stratos diffusers have long proven how reliable they are, strong, simple to use and cheap to operate. It is possible to choose between spreading only material (salt or sand), spreading only brine or both at once. The spreader is equipped with a complete computer that controls all the activities of the spreader, such as spread volume and spread width regardless of vehicle speed. The computer also records everything the spreader does, such as driving speed, location, spread amount of material and liquid, spread width and whether more is spread to the right or left. This information can then be sent through the GPRS system to Vegagerðirn's Winterman system, or a user can run his own system and monitor all distributors at work, centrally from the company's computer. This spreader is intended for 4-axle vehicles with a maximum axle weight between 32 and 42 tons. The diffuser is available in sizes 10, 12 and 14 cubic meters. The diffusers are custom ordered according to the needs and wishes of the buyer, but the ordering process takes 8-10 weeks.
Technical information:
| XL | |
| Amount of material (cubic meters) | 12 – 14 |
| Spreading width (m) | 2 – 14 |
| Water tanks (L) | 3000 / 5000 |
| Extra water tanks (L) | |
| Maximum axle weight (kg) | 32.000 – 42.000 |
Schmidt – Cirron
The Cirron teeth are manufactured by Aebi Schmidt in Germany, one of the largest manufacturers of machine tools in Europe. This tine is very suitable for the front of trucks that are engaged in inner-city hauling or hauling on narrow carriageways or country roads off motorways. You can get 3 sizes of the Cirron tooth, 2.7m – 3.0m – 3.2m. You can also choose helper bikes or skis, rubber cutters or steel cutters, etc. A lot of attention is paid to safety in production at Schmidt, but all teeth are produced in 3-4 units, where each unit is independently springing, and the cutter blades have independent springing as well.
Technical information:
Technical information:
| SL 27 | SL 30 | SL 32 | |
| Height (mm) | 930 | 930 | 930 |
| Total length (mm) | 2.700 | 3.000 | 3.200 |
| Routing width at 32 degrees (mm) | 2.290 | 2.540 | 2.710 |
| Number of papers | 3 | 4 | 4 |
| Weight without mounting (kg) | 700 | 755 | 775 |
Schmidt – Gradmeko
The Gradmeko plow is very robustly built and well known for its quality and durability. There are few plows with such a long service life and low lifetime costs. The smallest plow has two independently springing chambers, while the others all have a four-part chamber where each chamber is self-sustaining and has an independent spring release on each cutter blade.
Technical information:
Technical information:
| VP 240 | VP 280 | VP 320 | VP 360 | VP 400 | |
| Height at center and end (mm) | 850 | 850 | 1.020 | 1.020 | 1.020 |
| Maximum width (mm) | 2.400 | 2.800 | 3.200 | 3.600 | 4.000 |
| Routing width at 35 degrees (mm) | 1.950 | 2.290 | 2.620 | 2.945 | 3.275 |
| Weight with fasteners (kg) | 500 | 560 | 885 | 920 | 960 |
| Number of compartments | 2 | 4 | 4 | 4 | 4 |
Schmidt – Throwing plow D 3300
These throwing plows are available with or without wheels. Note that the price is based on the plow without all accessories, such as wheels, control box and fasteners. The product is not in stock. Please contact a sales representative for pricing.
Technical information:
| D 3300 | D 3600 | |
| Height left/right (mm) | 65071540 | 620/1450 |
| Maximum width (mm) | 3300 | 3600 |
| Routing width at 35 degrees (mm) | 2750 | 3000 |
| Angle of wear blades (degrees) | 42 | 42 |
| Weight (kg) | 1020 |